Updating or Installing The Killer Control Center
The Killer Control Center installers, contain drivers for the Killer Wireless-AC 1525/1535/1435, Killer E2200, E2205, E2400, and E2500. The Killer...
- Home
- Knowledge Base
- E2205
-
-
Ethernet Link Speed Capped at 100 Mbps
If your Internet connection seems slow for any reason, your first steps should be to clean install the Killer Control... -
Is VLAN (802.1Q) Supported With Killer Ethernet Adapters?
Some users have asked if Killer Ethernet Adapters support VLANs and the 802.1Q standard. Killer Ethernet adapters support VLAN tagging... -
Driver Errors in Device Manager
This article explains how to address each error that a user may encounter while using Killer devices. Code 10 Error... -
Problems With The Killer Network Manager
Some users have reported problems with the Killer Network Manager. The Killer Network Manager is our outgoing performance suite. It... -
Windows Server Drivers
From time to time, we receive requests for Windows Server compatible drivers for our network adapters. Although we do not... -
Linux Support
Most Killer Networking adapters work well with most Linux kernels without the need for any troubleshooting or setup. As there... -
Installing Drivers Using Device Manager
If you would like to install the Killer E2200, Killer E2400, Killer Wireless-N, or Killer Wireless-AC drivers without the Killer... -
Can the E2500/E2400/E2200 Be Used Wirelessly?
Users have asked if the E2500, E2400, and E2200 can be used wirelessly. These are Ethernet adapters, so they cannot... -
PC Wakes From Sleep Unexpectedly
Users may notice that their PC either wakes from sleep unexpectedly or does not stay in sleep mode. This issue... -
Ethernet Adapter No Longer In Device Manager
When a device goes missing from the Device Manager, it means that either the BIOS or the operating system is... -
What Is A “Killer Enabled Device?”
A “Killer Enabled Device” is any computer that is connected to the Internet using a currently supported Killer Networking adapter.... -
Enabling Wake-on-LAN
Wake-on-LAN requires various other settings to be set correctly. Your firewall and antivirus programs must be set up correctly, as... -
Optimizing E2200/E2400/E2500 Advanced Driver Settings
Optimizing E2200/E2400/E2500 Advanced Driver Settings Some users have asked for optimal advanced settings for their Ethernet adapters. Keep in mind... -
Apex Legends Freezing, Lagging, Rubber-banding with Killer Adapters
Some users have indicated problems with the Apex Legends game when using the Killer Control Center. Disabling Advanced Stream Detect... -
Enterprise LTSB Builds and the Killer Control Center
Enterprise LTSB builds are not intended for consumer machines, and are therefore not fully featured. We do not test the... -
Why Did My Driver Version Not Change After Updating Drivers?
Some users have expressed confusion over why their driver versions do not change in Device Manager when they update drivers... -
Killer Control Center Showing Older Version
Some users have reported that the Killer Control Center seems to be showing an older version when installed. The Killer... -
Network Cable Unplugged
Some users may experience a “Network Cable Unplugged” error. This error indicates that the computer does not detect power moving...